Black Bros. Co. - Pressing

3D ThermoFormer Vacuum Press

admin — Mon, 09 Jan 2012 12:23:07 -0500

3D ThermoFormer Vacuum Press

3D ThermoLaminator Membrane Press

admin — Mon, 09 Jan 2012 12:18:18 -0500

3D ThermoLaminator Membrane Press

3D SmartPin ThermoLaminator Membrane Press

admin — Thu, 29 Dec 2011 12:22:07 -0500

3D SmartPin ThermoLaminator Membrane Press

Power Pod Press

admin — Wed, 13 Aug 2008 12:31:38 -0400

Power Pod Press

Motorized Adjustment Press

admin — Wed, 13 Aug 2008 12:30:01 -0400

Motorized Adjustment Press

Air Pod Press

admin — Wed, 13 Aug 2008 12:23:47 -0400

Air Pod Press

Power Pod Press

admin — Fri, 30 Jun 2006 17:02:29 -0400

The Black Bros. Power Pod Press offers customers a low-priced, moderate pressure press. The 28" (711mm) high opening is designed to laminate one stack of boards at a time (up to 34- 1/4" thick panels). Up to 40 PSI of regulated laminating pressure can be developed, adequate for laminating HPL to particleboard or MDF. To keep cost to a minimum, it was designed with a fixed opening. The press is offered in two popular sizes, 4' x 8' (1219 mm x 2438 mm) and 5' x 12'(1524 mm x 3658 mm) designed to meet the needs of the smaller shop, or a larger shop with small to moderate laminating requirements of pattern sized panels.

Hot Press

admin — Fri, 30 Jun 2006 17:01:41 -0400

Black Bros. offers the Joos Hot Press for Veneer panel lamination. These quality machines feature accurate and responsive Okotherm platens. Most often used in the lamination of small batch high end architectural panels.

Air Pod Press

admin — Fri, 30 Jun 2006 17:00:10 -0400

The Black Bros. Air Pod Press uses air operated platen presses that are commonly used for stack-laminating "sandwich-type" assemblies such as flush doors, table tops, furniture parts, insulating panels, etc. Today's improved close tolerance stock with uniform thickness and surface smoothness eliminates the need for the high pressures previously required to bring face and core stock surfaces into bonding contact. Black Bros. Air Pod Presses apply uniform pressure over the entire platen area for strong, high-quality bonds, and increase production of same size panels compared to one-at-a-time systems. Platen sizes are available from 2' x 4' (610 mm x 1219 mm) to 5' x 12' (1524 mm x 3658 mm). Presses are available in: end or side loading styles; with manual or motorized height adjustment; 10, 50, and 80 psi (69, 345, and 551 kPa) models. Normally, two or more presses are used to provide continuous production output.